Storage for Stampin' Up Ribbon shares

At the launch of every new Stampin' Up Catalogue I always take part in a ribbon share. It is a good way to get a sample of each ribbon which allows me to show use them in my tutorials and also lets me see what ones I would want to buy a hole reel of. But I have not been satisfied with how I store these 1m lengths of ribbon as I cannot see them readily and therefore do not use them. So I set about designing some storage for these ribbons which allows me to see them all.

This was a very quick project and I made 3 very easily and now all my ribbon is accessible and visible.

Measurements For Box

• Extra Thick Whisper White 7 1/2 x 6 3/8
• Score @ 1 3/4 on all 4 sides
• Decorates sides:
• 2 in Fresh Fig 3 3/4 c 1/12
• 2 in Fresh Floral DSP 3 1/2 x 1 1/4
• 2 in Fresh Fig 2 5/8 x 1 1/2
• 2 in Fresh Florals 2 3/8 x 1 1/2

Measurements for Bobbins 

• Extra Thick Whisper White 2 x 2 3/4
• Use the Envelope Punch Board 
• Punch a@ 2
• Rotate punch @2
• Repeat on other side

I used washy tape to hold ribbon on bobbin and wound it rounded secured again with washy tape.  Bobbins were then placed in the box and the box sits in my ribbon storage. 

So now you have the measurements you can press play below and craft along with me :-) 

I hope you liked this project and find it useful.

See you again tomorrow :-)

Gez xxx

My Shop 

My shop is open 24/7 Click here to shop! Remember that during Sale-A-Bration you earn free products for every £45 you spend (not including p&p)

Joining Offer

There is no better time to join Stamping' Up, during Sale-A-Bration you get to chose

• £130 worth of products for your starter kit 
• AND 2 stamp sets of your choice 
• All for £99 (p&p free with starter kits). 
• 20% discount on future orders, rising to 25% when promoted
• There is no obligation to sell you can be a hobby demonstrator and just shop for yourself with the 20% discount. 
• Click here to join my team!

Follow me on Facebook

Follow me on Instagram

Follow me on Pinterest